Skip to main content
中文

FUCHS Gleitmo SFL 9563 Heat-curing solid film lubricant 1KG/Can

FUCHS Gleitmo SFL 9563 Heat-curing solid film lubricant 1KG/Can

Overview

FUCHS GLEITMO SFL 9563 is a heat‑curing solid dry‑film lubricant blended with both PTFE and molybdenum disulphide. Thanks to advanced binder system, it can be cured at relatively low temperature of 130 °C and forms firmly‑bonded dry lubricating film. Operating temperature: ‑70 °C to +200 °C, short‑term peak up to 250 °C. Resistant to mineral oils, synthetic fluids and many chemicals, it delivers good wear‑abrasion resistance, high‑pressure resistance and reliable corrosion protection for lifetime lubrication with decorative surface finish.
Pack sizes
1kgOn request
Application areas
Automotive Steel & Metallurgy Cement & Mining Chemical Processing Electronics & Semiconductor
Get a quote TDS SDS/MSDS

Description

FUCHS GLEITMO SFL 9563 is a heat‑curing solid dry‑film lubricant blended with both PTFE and molybdenum disulphide. Thanks to advanced binder system, it can be cured at relatively low temperature of 130 °C and forms firmly‑bonded dry lubricating film. Operating temperature: ‑70 °C to +200 °C, short‑term peak up to 250 °C. Resistant to mineral oils, synthetic fluids and many chemicals, it delivers good wear‑abrasion resistance, high‑pressure resistance and reliable corrosion protection for lifetime lubrication with decorative surface finish.

Applications

FUCHS GLEITMO SFL 9563 is suitable for automotive and machinery industries. It provides lifetime lubrication for metal parts under medium-high pressure and low-speed sliding conditions, and can also be used as running-in lubrication for heavy-load components. Typical applications include control levers, adjusting spindles, guide rails and other assemblies requiring dry film lubrication and corrosion protection. It can be applied by spraying, dip coating or centrifugal dip coating. Workpieces must be thoroughly degreased and kept dry before coating. Phosphating or blasting pretreatment is recommended. Preheating workpieces to 80‑90℃ optimizes drying and film adhesion. Stir well before use.

Product photos

FUCHS Gleitmo SFL 9563 Heat-curing solid film lubricant 1KG/Can

Technical data

Technical data for this item is being compiled. Use “Request TDS” on the right for the full datasheet.

Pack sizes

Spec code Pack sizeContainer MOQAvailability
Gleitmo SFL 9563 1kg can On request

Application areas

More from this brand

More in this family

View all products from this brand